How To Clean Keurig Needle Without Tools

Cleaning the needle of Keurig from time to time is vital to keep the coffee maker. If you do not clean, the equipment can stop working at any point. Before it happens, look here to know the process, and after this, you can go for it.

How To Clean Keurig Needle Without Tools?

Proper maintenance of the coffee brewer is crucial to keep it working for a long time. If it is not done, the machine can descale any time. Here is an excellent opportunity for you to learn the cleaning of brew needles.

When you maintain a consistent schedule of cleaning the needle, you are less likely to fall in trouble, like an overflowing or a half cup, etc. Be with us to know about the needle cleaning process without tools.

Ways To Clean Keurig Needle Without Tools

Step 1: Collect the things you will require before cleaning, and they are freshwater, a clean paperclip, and Keurig descaling solution. Remember to work in a flashlight if you are when you start the procedure.

Step 2: Be cautious as the needles are sharp and check if the machine is powered off.

Step 3: Take out the portion pack assembly with the funnel present at the portion pack holder. To do that, just pull the sides till they get detached.

Step 4: On the bottom, an exit needle is there, and you have to locate that. Put the unfolded side of the paperclip in the tube and rotate in a circular motion. By doing so, you can eliminate all debris present there.

Step 5: Under running water, rinse the portion pack holder, or you can place it on the top shelf of the dishwasher.

Step 6: Lift and look for the top handle of the brewer. The needle is present below the brewer below the part you have lifted.

Step 7: You will see a sharp point and two holes, and you must insert the paper clip inside two holes of the entrance needles.

Step 8: Again, rotate the paperclip into the two holes in a circular direction to take off the dirt.

Step 9: Take out the lower portion of the unit, and keep it in place to lower the handle of the brewer.

Step 10: Now two water brewer cycles, and it is a perfect time to add the descaling solution.

Step 11: If you want, you can avoid step 11, and after that, you can start using the coffee maker again.

How To Change Keurig Needle?

While cleaning, you might see that the top needle does not need to be changed. But the bottom needle is the one that you will require to replace. The process is easy and does not take more than five minutes.

It is necessary when you find that the needle must be changed. The process you must follow is:

Step 1: Always have an extra replacement needle with you as it allows you to change whenever required. While checking if it is suitable for your machine; otherwise, it won’t fix.

Step 2: Unplug the machine and lift the handle to bring out the pod. If you are already in between the cleaning process, you do not need to repeat the steps.

Step 3: Separate the funnel and replace the needle and rinse it under running water. Set aside for some time till it dries up and take it with the replacement pod and snap together.

Step 4: If it fits perfectly, then your machine is ready for operation. In case the unit does not, you must check the pod and fit properly. Return the pod and close every part.

Step 5: Run the brew to check if it is working as before. If it works, your machine is ready for use.

Signs Indicating Keurig Needles Must Be Cleaned

If the coffee maker is brewing coffee without creating any problem, it is fine. But that does not indicate you won’t have any problem ever. Here are some signs which if you get, it means you have to clean the needle.

When The Machine Stops Brewing?

As you place the K-cup and switch on the machine, you find it is no longer brewing. It is because of the issue with the needle because of clogging. Due to that, you cannot prepare coffee anymore.

A Half Cup Coffee

You did not receive the regular amount of coffee or received only half, and the reason is a needle. It’s because the needle did not puncture, which is why there is no coffee.

It can also happen due to other reasons, but you must first check the needle. Take out and clean it to verify if the coffee maker starts working again.

Splashing And Sputtering?

If you find that brewing coffee is getting messy, it is because of the needles. This issue would not have happened if you had cleaned the machine on time.

However, take the parts out, clean them to maintain the device, or else, the coffee brewer will get spoiled.

Preparation Taking More Time?

Is the tool taking more time to prepare a cup of coffee? If it happens, the first thing to be checked is the needle. Cleaning the needle will help in maintaining the optimum speed.

Unexpected Shut Off?

If you see that the machine has shut off unexpectedly while brewing the coffee, it is because of the needle. Now it’s time to either replace the needle or get it cleaned.

First, open the device and take out the needle and check after cleaning if you can use it. If so, it’s good as you can go ahead and do the process. In case the needle is not in good condition, replace it.

When Not In Use?

When you are out of the station, and you won’t be using the machine for some time, ensure to clean the device and cover it. Sometimes, keeping it uncleaned for a long time after using leads to clogging.

If left for a long time, the machine can get spoiled, and you may not be able to use it again.

The Exact Time To Clean The Needle?

The best schedule to maintain is once a month, and it includes cleaning the exit needles, the k cup holder, and the area around the cupholder. After three to four months, the descaling process should be done. The time can vary based on the mineral content of the water also.

With that, prefer to clean the water tank at least a week to have the best-tasting coffee. Rink the tank daily and fill it with fresh water every day to enjoy having a good cup of coffee.

The needle of the Keurig coffee maker is small and may not look so important to you. Many people do not pay attention to it, following which they have to face the issue.

It is vital to check and clean the needle frequently to avoid clogging and dysfunctioning. Follow the above steps to do the process, and with that, you can keep the device using for its life. If you do not do, be ready to experience more issues now and then.

Is It Necessary To Clean Keurig Needle Without Tools?

Yes, it is necessary to clean to ensure your unit is functioning smoothly. Some coffee lovers do not pay attention to it, following which they cannot prepare coffee.

In spite of facing the unexpected, it is better to clean the device as it hardly takes 15 to 20 minutes. By doing the process, you can keep on using the unit and increase its lifespan.

Do I Need An Expert To Clean The Keurig Needle Without Tools?

There is no need to call an expert to clean the Keurig needle without a tool, as you can do it on your own. The process is easy, and you need a few things, like freshwater, a clean paperclip, and a Keurig descaling solution.

Sharing is caring!