Contents
In this modern world, the most easy-to-use and convenient coffee maker is Keurig. These single-use coffee machines will help you get your morning coffee quickly without much hassle. If you already have one, you are well aware of the maintenance and cleaning required.
Although cleaning the coffee machine is something everyone must do, are you really cleaning all its parts? Including the needle?
If not, there are several ways through which you can easily clean up the Keurig needle without any tool and get to enjoy a warm cup of coffee whenever you want.
In this post, you will learn about the best and most effective ways through which you can clean the 2.0 Keurig needle easily and quickly. Let’s get started.
How to Do Keurig 2.0 Needle Maintenance Without Tool?
The maintenance work on Keurig 2.0 needle is something that is quite overlooked. Cleaning the needle inside the coffee machine is extremely important for the taste. You can do the cleaning work quite easily by just following a few steps.
That’s why you must clean the needle regularly so that you can get the most out of this coffee machine. You will need a specific tool and by following several steps.
Cleaning the Keurig 2.0 needle without any tool is not that difficult. If you’re doing the cleaning work for the first time, there are several steps that you have to follow. So what are these steps? Let’s find out!
Step 1
Firstly, you have to unplug the coffee machine so that you don’t injure or shock yourself during the cleaning process.
Step 2
You have to remove the K-cup holder of the coffee machine, and to gain access to the pod holder, you have to open the handle and grab hold of the pod holder’s top section.
After that, push the holder right from the bottom area with your hand. Finding the pod holder is pretty easy because it’s located at the place where you insert the coffee pod to make coffee.
Step 3
When you get the pod holder, take it apart and remove the funnel. The funnel is located beneath the pod holder; when you grab both ends, you can easily free the funnel. If the connection is tight, run the pod holder under hot water.
Step 4
Now, you need a toothpick or a paperclip. Insert the paper clip or the toothpick within a small tube on the bottom area of the holder. If you’re using a paper clip, you must straighten it and then flip the holder upside down.
Step 5
Next, you have to move around the toothpick or the paper clip to eliminate all the clogged coffee debris or grounds. Make sure you don’t poke the toothpick or clip through the whole tube. Also, don’t think of pressing down hard because it can damage the Keurig needle.
Step 6
Once the clogs have loosened up, you must run the funnel and the pod holder under fresh water. Once you have rinsed the pieces, wipe them properly with a cloth. While wiping, watch the needle so that it does not come into contact with your skin.
Step 7
Another way you can wash the funnel, and the pod holder is by placing them on the top rack of the dishwasher. Keep in mind to use the “AIR-DRY” option on the dishwasher for these pieces.
Step 8
Apart from the needle within the pod holder, you will also find another one beneath the brew head. You will surely notice that needle under the top area of the coffee machine once you lift up the handle.
Step 9
Once again, you must utilize the toothpick or paperclip to loosen up the dirt and debris stuck on the needle. Make sure to do this on both sides of the Keurig needle, and don’t apply a lot of force.
You have to be careful when getting rid of the dirt and debris from the needle, as contact can cause injury.
Step 10
When the funnel and the pod holder have become dry, put them back together. You will surely notice a click, which will be audible.
Step 11
You have to put the pod holder back into the coffee machine and then align the single tab at the top and the two tabs at the bottom. Once you snap it properly, you will hear a click.
Step 12
Now, you must run the brewing cycles with the help of clean water. Fill up the water tank and then plug it in. Place the container below so that you can catch the liquid. You must utilize your biggest coffee mug or cup during these brewing cycles.
Step 13
When the 2nd rinsing cycle is completed, you can use the Keurig coffee machine to make a cup like you normally did.
Why Do Maintenance on the Keurig Needle?
One of the biggest reasons to perform maintenance or clean the Keurig needle is for the coffee’s taste and also for safety. It’s because when the needle comes in contact with the coffee grounds and moisture, the debris and dirt will get stuck to it.
When the coffee grinds or debris are stuck on the needle for a long time, it will surely start to mold and decay at the same time. If this happens, it will contaminate all the cups of coffee. This is not just viewed as a health hazard but will have a huge effect on the coffee’s taste as well.
How Often Must You Clean the Keurig 2.0 Needle?
How often you clean the needle depends on how often you use the coffee machine. If you’re using the coffee machine several times daily, you must regularly clean the needle. You have to clean the needle every week to get the best outcome.
But cleaning the Keurig 2.0 needle regularly will not be needed if you do not utilize the coffee machine daily. Regardless of how many times you get to use it, you should clean the needle once each month.
Do You Have to Clean the Other Parts?
You must change the water filter to keep the Keurig coffee machine in excellent shape. So, you have to swap it every 2 months. But if you’re into brewing coffee and want to take up proactive steps, you have to change the filter quite often.
When performing the maintenance work, you have to descale the K-cup machine every week or month. Doing so will eliminate all the hard water deposits and other minerals that form inside the coffee machine.
To descale the coffee machine, you can either create a descaling solution of water and vinegar at home or purchase a commercial cleaner for the job.
Is it Possible to Replace a Keurig Needle?
You can easily replace the Keurig 2.0 needle by purchasing it from a well-known and trusted store. The bottom needle replacement is pretty easy compared to a punctured one.
So, for the replacement work, you will require the whole part that houses the needle, not just the needle. Be careful when you replace the needle so that you don’t injure or hurt yourself.
Try to wear protective gloves and gently remove the damaged Keurig needle. If you do not know how to replace the needle, be sure to check the instructions in the manual, which you will get with the new needle.
How to Keep Your Keurig’s 2.0 Needle Clean?
You must clean the Keurig 2.0 needle regularly if you want the coffee machine to function properly without experiencing any issues. Without proper maintenance, you will surely see a decline in the machine’s performance, and the cups of coffee will not taste good at all.
Remember one thing, when doing Keurig 2.0 needle maintenance, you do not require any special tool for it. You can follow the toothpick or paper clip procedure to get rid of all the debris or dirt that is stuck on the Keurig needle.
Once you properly know the paper clip or toothpick method, you will realize that it will not take much time to clean up the needle properly.