Contents
A Keurig coffee machine offers unparalleled convenience, allowing users to brew a single cup at a time with just the press of a button.
However, like all machines, they’re not immune to occasional hiccups. One of the common issues users sometimes encounter is the machine dripping even after the brewing cycle is complete.
If your Keurig is giving you this post-brew puddle, you’re not alone. In this article, we’ll explore the potential reasons behind your Keurig’s unwanted drips and walk you through practical solutions to address and prevent it.
Why Your Keurig Keeps on Dripping After Brewing?
There are three possible reasons why your Keurig keeps on dripping after brewing. They are as follows:
1. Overfilling of the Water Reservoir of the Coffee Machine
Whenever you find your Keurig dripping after brewing, it might be because there is excessive water inside the reservoir.
If you look closely, you will find that there is a dotted line inside your Keurig’s reservoir. It is always better to fill your espresso machine to that line and not go beyond it even by a drop.
This way, it can resolve the dripping issue of your coffee machine.
Also, remember that excessive water pooling at the base of your Keurig can be tremendously dangerous. Since it is involved with electricity, you must be extra careful about that.
2. Clogging and Leaking of the Coffee Machine
After using it for quite some time, your Keurig coffee machine might get clogged with certain mineral deposits. In most cases, this happens when you use unfiltered tap water in the machine for brewing coffee.
It would be best if you remembered that tap water contains numerous heavy metals and high contaminants. So when the heavily loaded mineral water gets inside your brewing machine, the minerals start depositing. Thus, the calcium salts remain deposited within the interior parts of your machine.
And with regular mineral deposits, certain parts of your Keurig coffee machine might significantly clog. So, it is always best to avoid using tap water, and start using filtered or bottled water instead. It is because filtered water has considerably lower mineral contents for forming any cluster.
Besides, you can consider descaling your Keurig after every few months. This will efficiently help you in cleaning your espresso machine after using it for a specific time.
Also, it efficiently resolves the issue of continuous dripping caused due to the clogging of your Keurig.
3. Broken or Non-Functional Upper Gasket
If your Keurig coffee machine has a broken or loose upper gasket, then it might significantly drip while brewing. The gasket is usually made of silicone, which helps seal the water hose and K-cup tightly.
Over time and rigorous usage, the silicone tends to wear away, thereby creating a gap between the sealing. But if you have bought your Keurig recently, ensure that the gasket is perfectly aligned. Also, check whether the gaps between the K-Cup and the puncture needle are perfectly closed.
If any of the pieces of your Keurig are missing or broken, you should immediately order a replacement.
How to Fix Dripping Issue of Keurig After Brewing?
Before you can get started with quick and easy solutions, you must clearly remember one thing. It is essential for you to execute the feasible and applicable solutions according to the reasons behind the dripping. So, here is a comprehensive listing of a few solutions that will prevent your Keurig machine from dripping:
1. Dump Little Water From the Reservoir
All coffee brewing machines have a significant capacity for holding water within the reservoir. And going beyond the limit might lead to spilling and dropping issues.
But this issue can be quickly resolved when you dump some water from the reservoir. So when the water levels are below the limit, you will not find your Keurig dripping after brewing.
2. Descale Your Keurig with a Descaling Kit
The best and feasible solution for fixing the dripping issue of your coffee brewing machine is to descale it. You can easily descale it with white vinegar or a readily available Keurig descaling solution.
If you have the need to descale your Keurig, you need to follow these steps:
Step 1. Firstly, you must take out all the portable machine parts. After that, you must clean those parts thoroughly with a dish wash or detergent powder.
Step 2. Once you are done cleaning all the portable parts of the machine, you need to prepare a descaling solution. You can either choose a white vinegar solution or a Keurig descaling solution. To make a precise solution, you must abide by the instructions in the packet.
Step 3. After this, you are required to use the white vinegar solution or Keurig descaling solution twice on your brewing machine.
Step 4. Lastly, you need to use hot distilled water before preparing for another brew cycle. This will efficiently help alleviate the deposits of the vinegar smell and the descaling solution.
You can consider implementing the descaling process once every week. This will keep your coffee brewing machine in its top-notch condition.
3. Use Filtered or Bottled Water
It is best never to use the regular unfiltered tap water for brewing espresso in your Keurig. In the earlier section, you have already read why you shouldn’t be using tap water in your espresso machine. And probably the best solution is to use filtered or bottled water for brewing your morning coffee.
When using filtered water, you can deliberately avoid calcium or mineral deposits within the waterline pipes. This way, you can efficiently reduce the quantity of mineral and sediment deposits. Thus, it will have a considerably lower impact on the water tank functionalities.
Besides, you will also be able to ensure that your Keurig’s water tank and pipes are functioning correctly. And this will help you to avoid the dripping issue of your Keurig after brewing.
And if neither of the three solutions can fix the dripping issue of your Keurig, the cause might be something different. It can most likely be a broken hose or valve that is deeply seated within the machine. For this, you must contact customer care for further assistance.
How Can You Clean the Needle on a Keurig?
You might notice that the needle of your Keurig has debris of coffee stuck inside it. And whenever you notice this, you need to clean it as soon as possible. For a thorough cleaning of your Keurig needle, you will need the following:
- Clean paper clips
- Large ceramic mug
- Sink and water
Once you are ready with your materials, you need to follow these cleansing steps:
Step 1: You must turn off your Keurig and unplug it from the wall.
Step 2: Remove the pod holder carefully from your brewer.
Step 3: Carefully remove the funnel from the pod holder.
Step 4: Locate the tube below the pod holder.
Step 5: Fish out all the debris by using a paperclip.
Step 6: Thoroughly clean the funnel and pod holder in the sink.
Step 7: Find out the entrance needle on the Keurig.
Step 8: Carefully insert the paperclip into the needle.
Step 9: Carefully place the pod holder into your coffee brewing machine.
Step 10: Plug back your Keurig and turn it on.
Step 11: Position your mug on the drip tray and lower the pod holder.
Step 12: Make one large cup of coffee yourself!
How Often Should You Be Descaling Your Keurig?
Per the company’s orders, it is always best to describe your espresso machine every 3-6 months. Also, some Keurig coffee brewers come with a descaling light. This automatically turns on when it is time for descaling and cleaning it.
But if your brewing machine doesn’t have a descaling light, you must keep careful track of the last descaling time.
Conclusion
We hope this troubleshooting guide has efficiently helped you learn all the possible reasons for your Keurig machine dripping. Also, the innovative and manageable solutions will help you determine the leading cause of the issue. Until then, happy brewing.